{
  "type": "process",
  "name": "miaolay cat v1 - P1S 0.12mm AMS",
  "from": "User",
  "version": "2.8.0.5",
  "inherits": "0.12mm Fine @BBL X1C",
  "print_settings_id": "miaolay cat v1 - P1S 0.12mm AMS",
  "compatible_printers": [
    "Bambu Lab P1S 0.4 nozzle"
  ],
  "print_extruder_id": ["1"],
  "print_extruder_variant": ["Direct Drive Standard"],
  "layer_height": "0.12",
  "initial_layer_print_height": "0.2",
  "wall_generator": "arachne",
  "wall_loops": "3",
  "top_shell_layers": "6",
  "top_shell_thickness": "0.72",
  "bottom_shell_layers": "5",
  "bottom_shell_thickness": "0.6",
  "sparse_infill_density": "15%",
  "sparse_infill_pattern": "gyroid",
  "seam_position": "back",
  "initial_layer_speed": ["25"],
  "initial_layer_infill_speed": ["40"],
  "outer_wall_speed": ["40"],
  "inner_wall_speed": ["80"],
  "top_surface_speed": ["35"],
  "sparse_infill_speed": ["100"],
  "internal_solid_infill_speed": ["80"],
  "gap_infill_speed": ["40"],
  "bridge_speed": ["25"],
  "default_acceleration": ["3000"],
  "outer_wall_acceleration": ["1000"],
  "top_surface_acceleration": ["1000"],
  "enable_support": "1",
  "support_type": "tree(auto)",
  "support_style": "default",
  "support_threshold_angle": "30",
  "support_on_build_plate_only": "0",
  "support_top_z_distance": "0.24",
  "support_bottom_z_distance": "0.24",
  "support_object_xy_distance": "0.35",
  "support_interface_top_layers": "3",
  "support_interface_bottom_layers": "2",
  "support_interface_spacing": "0.3",
  "support_filament": "1",
  "support_interface_filament": "1",
  "support_speed": ["70"],
  "support_interface_speed": ["35"],
  "independent_support_layer_height": "0",
  "brim_type": "outer_only",
  "brim_width": "5",
  "brim_object_gap": "0.1",
  "raft_layers": "0",
  "enable_prime_tower": "1",
  "prime_tower_width": "35",
  "prime_tower_brim_width": "3",
  "flush_into_infill": "0",
  "flush_into_support": "0",
  "flush_into_objects": "0",
  "print_sequence": "by layer"
}